- Corporate Headquarters
- 9953 Broadway · P.O. Box 409
- Irwin, PA 15642
- Phone: 724-864-8900
- Fax: 724-864-8909
- info@irwincar.com
Mine and Tunneling Supply
The Wheel Burro
Gives You The Power To Move Heavy Loads Quickly and Safely
The Wheel-Burro from Irwin is the safe, efficient way for one worker to move loads as heavy as 1,000 lbs. quickly and easily. Only 37 inches wide, the Wheel-Burro carries the load in a strong, 10 cubic foot, UHMW bed in front of the operator for easy movement in close quarters and tight turns. One worker can easily move a full load of tools, components and material safely on grades up to 10 percent.
- Safe…Load Always in Front of Operator
- Time Savings…Carry More in Less Trips
- Heavy Duty Construction…Continuous Welded Frame
- Back Saving Convenience…No Manual Hauling
Electric Brake, Potentiometer Accelerator, No Cables
Standard Features
- Direct drive — no chains, sprockets or belts
- DC series wound traction motor
- Variable speed to 4 MPH
- Solid state controller
- Limited slip differential provides power to both driving wheels for safe positive traction on rough terrain
- Quiet 24 volt battery power
- 110 VAC on-board charger
- Capacity to carry up to 1,000 lbs or 10 cu ft of component equipment or material
- Only 37" wide to fit in close quarters and tight areas (turns within its own dimension)
- Belly switch — propels Wheel-Burro away from operator and de-energizes accelerator
- Removable tailgate and dumping bed
- 16" diameter tires
Optional Features
- Operating light
- Fire Extinguisher
- Optional Bed Construction
Specifications
Specifications are subject to change.
| General Information | |
|---|---|
| Capacity | Up to 1,000 lbs (10.0 cu ft) |
| Speed | Up to 4 mph (adjustable) |
| Overall Dimensions | 72"(I) x 37"(w) x 35.5"(h) |
| Motor | 1.2 HP 24 VDC; 2100 rpm, 3 ft-lbs torque fully enclosed |
| Drive axle | Rigid helical axle assembly; Ratio 16.99:1 limited slip |
| Tires & Wheels | |
| Drive axle | Two 16"0Ø x 6.50-8 TRU Power tires; 4 hole, 4" bolt circle |
| Steer axle | Two 12.5" Ø tires; 4 hole, 2.75" bolt circle |
| Solid State Control | DC traction motor controller with built-in microprocessor and high frequency power electronics and linear accelerator |
| Belly Switch | 3 position (direction) selector switch; Power on/off switch |
| Accelerator | Hand operated/cable driven |
| Brakes | Automatic/electric fail-safe |
| Battery Two | 12 Volt; Deep cycle; 225 min. at 25 Amps |
| Battery Charger | 110 VAC / 24 VDC |
To learn more, contact Irwin Mine and Tunneling Supply.
